Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Saddle clamp heads and lowers for KS Dropper posts.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

Brass compression olive for Hope hydraulic disc brakes.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- M8 Top Plate Bolt

KS Dropper Post Service Parts

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

KS Dropper Post Service Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Hope Brake Lever Parts

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

Complete remotes and remote components for KS dropper posts.

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area.