Shoes

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

Upgrade or refresh your Bontrager MTB shoes. - When it's time to refresh your trusty shoes, Trek Genuine Replacement Parts have you covered. - Ideal for riders who want to ride flat pedals now and upgrade to clipless later - For best compatibility, ensure the plug shape corresponds to the cutout on your shoe - Compatible with 2017+ Bontrager SSR shoes (all sizes) - Sold in pairs - Includes hardware

- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

- Allows installation of 2-bolt SPD-style cleats on select Bontrager Road shoes - Compatible with Bontrager road shoes with nylon sole - Adapter plate replaces rubber plug in sole of shoes - Packaged as pairs

Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

Upgrade or refresh your Bontrager MTB shoes. - When it's time to refresh your trusty shoes, Trek Genuine Replacement Parts have you covered. - Original replacement toe spikes for your Bontrager MTB shoes - Includes 4 polymer spikes and new hardware

If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Neoprene Toe Covers, history is doomed to repeat itself this winter. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene

Replace your heel studs for like-new traction Squeeze more miles out of your Bontrager cycling shoes with these genuine Bontrager universal replacement parts. - Genuine replacement heel studs for your Bontrager road shoes - Maintains traction when walking off the bike - Includes mounting screws - Compatible with 2012 – 2016 Bontrager Road shoes

For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene

Protect your little piggies With the Windshell Toe Cover, your feet retain an extra dose of warmth thanks to windshell material that is windproof and water-resistant no matter if riding on the road or mountains. - Windshell material provides insulation and protection during windy and wet riding - Integrated pull tabs for easy on and off - Designed for use with road or mountain shoes for maximum versatility - Soft elastic band above ankle for added coverage and comfort Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 50 deg. F - Fiber content: 78% Rubber / 15% Nylon / 7% Polyester - Material: Woven - Sole Construction: Closed with holes for clips

From sprinkles to downpours, our Rain Shoe Covers are built to keep feet dry and comfortable in wet weather. Fully taped seams and a breathable Polartec® NeoShell® membrane seal out wind and water while also letting sweat escape, so feet feel fresh all ride long. Designed to fit snugly over cycling shoes, the four-way stretch material makes them easy to get on and off. - Fully taped seams prevent water intrusion. - Polartec® NeoShell® fabric is breathable, stretchy, and completely waterproof. - Abrasion-resistant toe and heel sole with velcro closure. - Fabric Content: 65% Nylon, 35% Polyester.

Comfortable elasticized shoe cover with rear zipper. - Made of elasticized Elastane for great comfort. Elastic band on the top opening and rear zipper - Reflective tape on the rear part, lateral S-logo print. - European sizes S (35-37) M(38-40) L(41-43) XL (44-46)

A toe cover engineered for cool and windy rides with built in water-resistance perfect for on the road or trail. Protect your little piggies With the Windshell Toe Cover, your feet retain an extra dose of warmth thanks to windshell material that is windproof and water-resistant no matter if riding on the road or mountains. PRODUCT DETAILS - 10,000mm waterproof main body fabric - Abrasion-resistant toe and heel material provide unmatched durability - Designed for use with road or mountain shoes for maximum versatility

Full neoprene cycling shoe covers. When Jack Frost arrives, keep your feet warm with our neoprene cycling shoe covers. They feature an easy on and off design for road or mountain bike shoe compatibility.

Versatile Road Cleat For All Types of Riders For anyone unsure about which cleats to choose, the SM-SH11 are a great starting point. With their large float range and centered pivot point, Shimano’s Yellow SPD-SL cleats allow the toes to point in a wide range of angles and provide more room for error during set-up while still delivering an efficient connection between rider and bike. So if you're new to cycling, experience knee pain, lack flexibility, or simply don’t know where to begin, these cleats are your best bet. FEATURES: - SM-SH11 Yellow SPD-SL cleats come stock with most Shimano SPD-SL pedals and are a great choice for the majority of cyclists. They feature a six-degree float range (three degrees in each direction), which allows for free movement and low joint stress while still creating a solid connection between rider and bike. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls - Off-Bike Friendly: Cleat size and shape provide stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines injection molded main body with grip-enhancing TPU tips that are durable and maintain long lasting pedal engagement

Get the road shoe that checks all the boxes for the committed road cyclist. Velocis is designed for the road bike rider that needs one pair of cycling shoes to give them more of what they want. The Boa System provides a perfect fit that locks in power through every pedal stroke. If you're not careful, sponsors may come calling. Key features - inForm Pro last delivers an ergonomically optimized, high-performance fit - Silver Series carbon/fiberglass composite sole for added stiffness - Boa IP1 dial for precise, two-way adjustment - Stiffness index 10 of 14 - Perforated synthetic uppers allow increased breathability and comfort - Sole Fiber Content: Carbon Composite - Liner Fiber Content: Shell: 100% Polyester, Lining: 100% Polyester

Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance

Windproof cycling shoe covers. When the mercury really drops, keep your toes toasty with our windproof and warm Blitzen cycling shoe covers. The windproof outer layer takes the bite out of the wind and the neoprene inner layer holds in the heat.

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

A little cold or windy weather in the forecast? No problem. When full shoe covers are overkill, pull on our Neoprene Toe Covers for just the right amount of warmth and protection. Perfect for short winter rides or longer shoulder season excursions, the stretchy, weather-resistant design is compatible with all cleat types. Abrasion-resistant panels add durability, so feet stay comfortable ride after ride. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

Get the advantage of more grip with the Sabertooth Toe Spike Kit. The super-strong forged aluminum design easily mounts to any mountain bike shoe with front toe ports for a tighter grip when navigating cyclocross barriers, run-ups, and any off-bike section in less than ideal conditions. Key features: - Aggressive, earth-churning design - Made from precision forged stainless steel - Includes stainless steel mounting hardware

Trek BioDynamic Mid Arch Cycling Insoles provide better support to maximize pedaling efficiency and riding comfort. Feel better. Perform better. Trek BioDynamic Mid Arch Cycling Insoles with SuperFeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of efficient, pain-free pedaling. Product details: - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - Dual-density construction provides more comfort and durability - Insoles can be cut to fit each individual foot size - Made with 70% recycled content, including the top sheet, EVA, and heel cradle - 3 arch heights are available to better fit various foot types

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

Upgrade or refresh your Bontrager Ballista shoes. - When it's time to refresh your trusty shoes, Trek Genuine Replacement Parts have you covered. - Four sizes for the perfect fit - Allow for easy access to the rear BOA® dial

Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding

Best-Selling Waterproof Neoprene Overshoe That Insulates And Protects Your Feet From The Rain And Cold—Universally Loved By Roadies Worldwide. Endura was the first to employ neoprene in bike overshoes. Not wanting to rest on our laurels, we have revamped our core road overshoe with several new features to keep it one step ahead of the competition. A core stalwart of our collection, the neoprene Road Overshoe has been a best-seller in our range for many years. Here in Scotland, we know a thing or two about wet weather gear and this waterproof durable overshoe is the result of years of testing in the worst possible conditions. Comfort was a key consideration when updating the Road Overshoe. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, keeping your feet warm and dry inside. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Smooth neoprene construction and welded asymmetric seam give super-smooth styling and waterproofing - Offset rear zip with snap-down puller and zip guard - Crank-rub protection print - Reflective rear zip tape - Hard-wearing stitching using aramid thread

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements. - Rear Velcro closure.

If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system and a DWR coating that reduces water absorption while drastically improving dry time. And to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 370g (1/2 pair, size 42)

A stylish clip-in spin shoe designed for performance on the stationary bike and comfort during pre- and post-workout routines. All of the workout. None of the routine. Bontrager's all-new Cadence Spin Shoe brings performance and style to the spin studio. It's designed to help you ride beyond your fitness and indoor cycling goals, delivering the right fit for intervals on the spin bike, comfort during pre-ride stretches and post-ride burpees, and endless style on or off the bike. Compatible with two-bolt, SPD-style cleats. Product details - inForm Athletic last offers a roomier fit for on- and off-bike comfort - A single BOA L6 dial for precision fit and easy micro-adjustments - Mesh main material in upper allows for maximum breathability - Cushioned EVA foam midsole for all-day comfort - Sturdy sole with great traction for excellent walkability - 2-bolt SPD-style compatible (cleats and pedals sold separately) - Slip-on construction makes for easy on-and-off and ensures neoprene tongue stays put - Heel counter provides great heel lock for power transfer and prevents heel slip with cats' tongue material

A shoe cover engineered for comfort and protection in the harshest off-season conditions. Warm feet are happy feet Extend your riding season with the Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in frigid winter temps. PRODUCT DETAILS - 10,000mm waterproof main body fabric - Abrasion-resistant toe and heel material provide unmatched durability - Designed for use with road or mountain shoes for maximum versatility

A shoe cover built for wet and cold rides to completely shield against water when on the road or trail. Dry feet are happy feet For the wettest days where it seems the precipitation is never going to let up, the Waterproof Shoe Cover has you covered and will keep your feet warm and dry. Thanks to a thermal fleece lined fabric that traps body heat and taped seams with a waterproof YKK zipper, water stays out and warmth stays in. PRODUCT DETAILS - 10,000mm waterproof main body fabric with taped seams - Abrasion-resistant toe and heel material provide unmatched durability - Designed for use with road or mountain shoes for maximum versatility

Bontrager's Solstice Road Cycling Shoe is a performance shoe for road and pavement riders that strikes the perfect balance between on-bike comfort and efficiency. With its tremendous ease-of-use and modern style, Solstice is the go-to for cyclists looking for simplicity without sacrifice. - inForm Race last offers a slightly roomier, high-performance fit - Two secure hook-and-loop closure straps provide a wide range of adjustability - Nylon composite Bronze Series sole - PowerTruss sole design improves stiffness without adding significant weight - Stiffness index: 7 of 14 - 3-bolt and 2-bolt SPD-style cleat compatible (2-bolt mounting plate sold separately)

We all have our tricks for successful cold-weather riding. Want to know ours? Neoprene Shoe Covers. Made for cold, wet, and windy days on the bike, stretchy neoprene and fully taped seams help keep feet dry and comfortable mile after mile. Whether you’re suiting up for a gravel adventure or a road ride, the universal cleat opening makes it easy to pull on over your preferred cycling shoe type. Abrasion-resistant panels in high-wear areas add durability. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

Superior simplicity Quantum is a no-nonsense mountain bike shoe perfect for anyone looking to clip-in and hit the trails. This two-bolt compatible shoe features the reliable adjustability of three zonal hook-and-loop straps, so you always stay comfortable and secure when pushing the pedals. If you want to look sleek and sophisticated, look to Quantum for a more efficient ride. A functional, confidence-inspiring off-road cycling shoe for riders who are venturing into the clip-in riding experience. - inForm Race last offers a slightly roomier, high-performance fit - Three hook-and-loop closure straps provide a wide range of adjustability - Durable synthetic uppers are perforated for breathability, and hold up to the demands of all off-road riding - Rugged, GnarGuard outer material at toe and heel protects against abrasions and trail debris - Nylon composite Bronze Series sole provides stiff, yet walkable performance - Stiffness index 6 of 14 offers some forgiveness and elevates comfort - Tachyon rubber lugs allow reliable grip and traction in all types of terrain - Compatible with 2-bolt SPD-style cleats, plus placement indicators guide proper cleat installation and alignment

Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene

Dry feet equal happy feet For the wettest days when it seems the precipitation is never going to let up, the Waterproof Shoe Cover has you covered and will keep your feet warm and dry. Thanks to a thermal fleece lined fabric that traps body heat and taped seams with a waterproof YKK zipper, water stays out and warmth stays in. Product details - Fleece lined Stormshell fabric is waterproof while trapping warmth - YKK waterproof zipper and taped seams for ultimate protection and reliability - Designed for use with road or mountain shoes for maximum versatility Specifications - Temperature use (high): 75 deg. F - Temperature use (low): 55 deg. F - Waterproof Rating: 10,000mm - Fiber content: 45% Nylon / 35% Polyurethane / 20% Polyester - Material: Woven - Sole Construction: Closed with holes for clips

Versatility, thy name is SSR shoe! On-road, off-road, touring across the country, or commuting to the farmers' market—Bontrager's SSR Multisport cycling shoe will tackle it all. Its roomier fit and classic lace closure system deliver comfort and convenience, and the lugged, full-rubber outsole gives you all the traction you need for off-bike scrambles and adventures. - inForm Performance last offers our roomiest, most relaxed fit for comfort on and off the bike - Glass-reinforced nylon plate with textured rubber outsole for great grip - Classic lace closure system with convenient elastic lace keeper - Compatible with 2-bolt, SPD-style cleats - Plugs available for better flat pedal use when installed into cleat box using PN 563869 - Cleat compatibility: SPD 2-bolt - Closure type: Laces - Sole fiber content: 100% Rubber - Upper fiber content: 60.9% Polyester / 37.1% PU / 2% TPU - Liner fiber content: 100% Polyester

Versatility, thy name is SSR shoe! On-road, off-road, touring across the country, or commuting to the farmers' market. Bontrager's SSR Women's Multisport cycling shoe will tackle it all. Its roomier fit and classic lace closure system deliver comfort and convenience, and the lugged, full-rubber outsole gives you all the traction you need for off-bike scrambles and adventures. - inForm Performance last offers our roomiest, most relaxed fit for comfort on and off the bike - Glass-reinforced nylon plate with textured rubber outsole for great grip - Classic lace closure system with convenient elastic lace keeper - Compatible with 2-bolt, SPD-style cleats - Plugs available for better flat pedal use when installed into cleat box using PN 563869 - Sole fiber content: 100% Rubber - Upper fiber content: 60.9% Polyester / 37.1% PU / 2% TPU - Liner fiber content: 100% Polyester

Here's to longer rides and steeper hills Everyone who rides a bike can benefit from the comfort and efficiency of a cycling shoe, but not everyone needs a super-stiff sole without tread. Enter Solstice—a performance shoe for road and pavement riders that strikes the perfect balance between on-bike comfort and off-bike walkability. Key features - inForm Race last offers a slightly roomier, high-performance fit - Glass-reinforced internal nylon plate with full Tachyon rubber outsole - Compatible with 2-bolt SPD-style cleats - Stiffness index - 6 of 14 Details - Upper Fiber Content: 58.7% PU / 10.9% Polyester / 30.4% Nylon - Sole Fiber Content: 100% Rubber - Liner Fiber Content: 100% Polyester

Constant comfort. Subtle strength. Sleek, light, and stiff. Everything you want in a road bike shoe, whether you're just starting out or consider yourself a seasoned enthusiast. The Starvos cycling shoe offers a stealthy, distinctive look without breaking the bank. Product details - inForm Race last offers a slightly roomier, high-performance fit - Nylon composite Bronze Series sole - PowerTruss sole design improves stiffness without adding significant weight - Stiffness index - 7 of 14 - 3-strap hook and loop closure system - Compatible with 3-bolt and 2-bolt SPD-style cleats (2-bolt mounting plate sold separately) Specifications - Upper Fiber Content: 58.7% PU / 10.9% Polyester / 30.4% Nylon - Sole Fiber Content: 85% Nylon / 15% Fiber - Liner Fiber Content: 100% Polyester

Time to tackle new challenges The Vella women’s cycling shoe was designed to deliver the performance benefits of a cycling shoe with the go-anywhere fashion of a street shoe. All-day comfort and versatility means this clip-in shoe is perfect for the woman who's just active off the bike as she is on it. Key features - inForm Race last offers a slightly roomier, high-performance fit - Glass-reinforced internal nylon plate with full Tachyon rubber outsole - Compatible with 2-bolt SPD-style cleats - Stiffness index - 6 of 14 - Women's Specific Design is engineered to yield a better fit and greater comfort for women Details - Upper Fiber Content: 58.7% PU / 10.9% Polyester / 30.4% Nylon - Sole Fiber Content: 100% Rubber - Liner Fiber Content: 100% Polyester

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with a L6 Boa® for precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram™ rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)